
Display Panel + Display Surface
Two measurements decide where mandatory information goes on a Canadian food pack and how big it has to be. Here is what each one means.
Why these two terms matter
Serif + Gold designs CPG packaging in Surrey, BC, and two terms from the Canadian Food Inspection Agency (CFIA) shape every food label I lay out: the principal display panel and the available display surface. The first decides what sits on the front and how large the net quantity is. The second decides which Nutrition Facts table the pack can carry.
Principal display surface + principal display panel
The principal display surface is the part of the container that is displayed or visible when the product is on sale. The principal display panel is the part of the label applied to it. Aaron's shorthand: the surface is the pack, the panel is the print. How the surface is measured depends on the container.
- A pack with an obvious front: the total area of that side, not counting the top.
- A pack sold lid up: the top surface of the lid.
- A pack with no particular front, such as a round jar: 40% of the total surface area, not counting the top and bottom.
- A bag: one side, or one of the largest sides when they differ.
What has to be on the principal display panel
- The common name of the food.
- The net quantity, on consumer prepackaged foods.
- The front-of-package nutrition symbol, when the product needs one.
The ingredient list, the Nutrition Facts table and the company name and address can go elsewhere, but not only on the bottom. Mandatory text on consumer packs is at least 1.6 mm high, measured on a lowercase o.
Net quantity type size
The numbers in the net quantity are set in bold, at a minimum height that rises with the area of the principal display surface.
- 32 square centimetres or less: 1.6 mm.
- Over 32, up to 258: 3.2 mm.
- Over 258, up to 645: 6.4 mm.
- Over 645, up to 2,580: 9.5 mm.
- Over 2,580: 12.7 mm.
Available display surface
The available display surface is the total area of the package that can physically carry a label. It counts surfaces that already have print on them, mandatory or promotional. It leaves out the area taken by the barcode, glued seams, areas destroyed on opening such as tear strips, and curves or ridges that will not hold a legible label.
It matters because it sets, in part, which Nutrition Facts table format and size the pack can use. Packages with less than 100 square centimetres of available display surface qualify for the small package exemption. For bottles and jars with irregular shapes sold by volume, the CFIA gives a volume method in place of measuring curves: 100 square centimetres for 150 to 250 mL, and proportionally more above that.
How I use them
Serif + Gold measures both before any layout starts. The principal display surface sets the minimum net quantity size and where the nutrition symbol can sit. The available display surface tells me how much room the Nutrition Facts table will take, which is usually the largest fixed object on the back. Knowing both early stops a design being approved that cannot legally be printed.
Working on a food or drink pack for the Canadian market? I can check the layout before it goes to print. This note is design guidance, not legal or regulatory advice.
Talk it through